Did you mean serpentine belt. If so, Here you go.
Inspection
Inspect the drive belt for signs of glazing or cracking. A glazed belt will be perfectly smooth from slippage, while a good belt will have a slight texture of fabric visible. Cracks will usually start at the inner edge of the belt and run outward. All worn or damaged drive belts should be replaced immediately.
Removal & Installation
1. Raise and support the vehicle.
2. Remove the side and lower splash shields as an assembly via the bolts.
3. Rotate the drive belt tensioner clockwise and remove the drive belt.
To install:
1. Replace the drive belt and rotate the tensioner to its original position.
2. Attach the splash shields
you didn't mention if it was SOHC or DOHC. So here is a few pic's.
1. is SOHC without a/c
2. Is SOHC with a/c
3. Is DOHC
__________________
1991 ford f150 ext/cab 5.0 m5od 4x4
1997 ford escort lx 2.0l
1988 lincoln continental 3.8l
Jeff
"If it ain't broke, you're not trying." -Red Green
| 
