Ford Enthusiast

[yank with ute]

Would you believe Caddilacs from the 1970's? Which also means that most GM benches of the 70's interchanged with the Caddy's (only the padding and seat covers differ).

OR, have you considered placing the SEAT TRACKS from your Falcon's seat on a bench seat of the proper width/depth? Many people simply give up when the find the mounting bolts on the donor seat are in different locations then the seat they are replacing. They fail to notice that the seat tracks are removable and/or can be easily modified to bolt onto another seat.

Using seat tracks from the donor car usually puts the seat higher/lower/further back or front of the stock seat. Stick with the original Ford designed part and there is a much better chance of the donor seat being in the correct position.

I did a paper on auto seat design back in the dark ages (college) and quickly discovered that seat design and placement has a major physical effect on the human body. Simply bolting in a seat and thinking "I can adjust" is a way of developing MAJOR back problems.

Been there, suffering from that...