Ford Forums

Welcome to the Ford Forums forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact us.

Go Back   Ford Forums

» Advertisement
View Single Post
Old 05-05-2008, 02:38 AM   #2 (permalink)
sbullet
Junior Member
 
sbullet's Avatar
 
Join Date: Jul 2007
Posts: 23
sbullet is on a distinguished road
Default

You might want to try getting the Malfunction (MALF) code from the CEL (Check Engine Light). I have been having a hell of a time with mine surging and stalling , kicking , bucking, up and down idle. Here is a quote from something I found on the internet. I think I might have found my problem to be the Engine Coolant Temperature Sensor (ECT):

"How do I pull my OBD (1993-1995) MALF codes?
Diagnostic Port Pinout

The codes are blinked out by the Check Engine Light (CEL) on the instrument cluster. Remove the key from the ignition, pop the hood, find the tniy black box labeled "DIAGNOSTIC" near the stock battery tray location at the driver's side fender. Pop open the lid to the box to find the following pinout in the image to the right. Connect a short jumper wire between the pins STI and GND. Now run as fast as you can and take cover. Just kidding. So now, get comfy in the driver's seat with a pencil & paper, put the key in the ignition and turn it to the "ON" position, but don't start the engine. The CEL will begin pulsing any stored malfunction (MALF) codes on the CEL light. The long pulses represent the tens column digit, the shorter pulses represent the ones column digit. Take the count of each, put them side-by-side and you'll end up with a two-dgit code which, if all goes according to plan, should be listed in the table below:

The codes are listed at this address:

Probe Parts Classic

I did mine and all it came up with is the single digit code # 09

This describes what my car is doing:

"A faulty electrical connection, such as at the sensor wiring contact, will act like an "infinite resistance" as the electrical loop is not complete--this will make the ECU think the coolant is as cold as the lowest it is programmed to read, which is -70 degrees C. A broken sensor will do this as well. The first time I had a problem with the CTS, the dealer put the Tech 1 tool on the car and instantly saw that the CTS was reading -70 degrees---> problem found immediately!! Too bad we do not yet have the home laptop program to interface with the ALDL or you could do this simple diagnosis at home or even on the road!!"
sbullet is offline   Reply With Quote
 
» Online Users: 154
10 members and 144 guests
62FORD, 63 wagon, BroncoJoe19, mustang1969, Rich R, shefprb980, SoNiC1023, strongoak, ThunderInCali, wvuguy
Most users ever online was 286, 07-12-2007 at 02:00 PM.
» Stats
Members: 24,912
Threads: 17,179
Posts: 53,729
Top Poster: mark v (1,787)
Welcome to our newest member, ThunderInCali
» Partner Sites
Shopping for new cars can be a stressful experience especially if you don't have the right information. Our new car research center at CarEverything.com can help relieve this stress and bring the joy back to new car buying!

The Car Blog, or TCB for those who are acronymically inclined, is alive because some of today's top Web designers needed a place to drool and bitch about their motor vehicle obsessions.

Read the auto blog at Automotive.com to get the latest news and opinions, view the newest concept cars, and join discussions with auto experts from around the world.

Read the auto blog at Motor Trend Online for the latest auto industry news, expert opinions, vehicle photos, and more.

Join other Envoy Enthusiasts and chat about your GMC Envoy SLE, SLT, Denali and XUV. We are a growing community and would like to here from you.
» Advertisement
Powered by vBadvanced CMPS v3.0.1


Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
vB.Sponsors
vBulletin Style by: kreativfantasy.com