Compare intake gaskets and that should tell you if those parts should fit. The same for the valve covers and timing chain cover. The sensor I would replace. As for the other parts you could do a comparison of the OEM part numbers. If the part numbers are the same the parts will fit. Watch out for the reengineered or upgraded parts and part numbers, that is the part number could be changed but the part will fit. As for the mounting brackets you need to determine if the mounting locations are the same and whether or not the attaching holes are cast in the same location and pattern, say the A/C mounting bracket. Very often a parts book will tell you the part number will fit year X to year Y. Compare belt diagrams for the two motors and vehicles and that should give you an idea of whether the brackets will bolt in the same positions. If the brackets are in the same positions then the chances are good that the casting has not been changed (the mounting holes are likely to have been drilled in the same place and pattern). Have fun and good luck. | 
