Ford Enthusiast

[windtrak]

eds95

I understand what you are saying. This maybe a job for your local mechanic. No A/C specialist needed. I hope I did not indicate that the dashboard needs to be removed. Only the center part where the radio and heat controls are. This is easy, pull-put the ashtray, unscrew two bolts you see at the bottom and pop out the rest from the main dash. For ease of access, I unplugged the wiring harnesses for the rear wiper etc. Then you'll see the 4 small bolts holding the heat controls. Unscrew those and you'll have access to the vacuum tubes. All this may sound worse then it actually is. The hard part is to figure out if there is a vacuum leak or in my case, plugged vacuum line.

Good luck!

windtrak