[b]No power to fuel pump[/b]
Check the inertia switch (fuel safety cut off switch). The red button should be depressed.
[B]Pull out your owner's manual. [/B]
IF you don't have one, you may obtain one here...
https://www.fleet.ford.com/maintenance/owners%5Fmanuals/
It will have a diagram under [I]roadside emergencies [/I]of which fuse powers the fuel pump relay. Check the fuse(s). (note: there may be more than one fuse... one to the relay, one to the pump, and maybe one that goes from the power distribution box to the fuse circuits under the dash)
IF that is good then check the relay.
[URL="http://broncozone.com/forums/index.php?s=&showtopic=14905&view=findpost&p=78605"]How to check a fuel pump relay[/URL]
__________________
BroncoJoe19
2006 Alt Fuel Jeep (electric)
'98 windstar 3.8L
'99 Crown Vic 4.6L
'90 Full Size Bronco 5.0L
I'm not a professional mechanic, take my suggestions with a grain of salt, or a cup of coffee  If you found this post helpful, please click this  on the left of this post.
Last edited by BroncoJoe19; 10-04-2008 at 07:23 PM.
Reason: URL did not display properly
| 
