Got the panel off and switches out in 20 minutes! Got the new regulator and motor in
with help from neighbor holding glass, aligning motor, etc. in an hour. The regulator arm removes from the window track by sliding the arm toward front of truck. Two of the
switches were bears to remove, the power door lock and electric mirror controller.
I used two 1/8"x6" flat screw drivers to unlatch those two switches. Still have to put
panel back on tomorrow. I could see no way to get a bolt in top rear 4th bolt mount,
even with a hole cut in door. I may have to use rivet like the factory did on this hole.
Well pleased with everthing so far. Plan tomorrow to add lub. to window slides, etc.
and put panel back on. Overall job about 3 hours, total, for an old retiree. Thanks Guys!
Truck is a 2001 Ranger, XLT, Super Cab, I bought new. | 
