Found out how to get the fusible links out!! You have to pull up the 3-fuse block, loosen the small bolts that look like they are holding the wires to the block, Don't remove them, just loosen, then pull out the fuse, new one in, tighten the bolts back up, snap the block back into the Power Distribution box. Done. Wires are very stiff, and you'll just be able to get an 8mm socket on them to loosen the bolts. There are 2 per fuse. one left and one right., You'll have to remove the battery to get at the left one.
Thought i'd share a small triumph.
Later | 
