 » Advertisement | | |  | 
12-26-2007, 09:11 AM
|
#1 (permalink)
| | Junior Member
Join Date: Dec 2007 Location: northern california
Posts: 5
|  Ford Ranchero stuck in 1rst gear.....
Hey guys, my little Ranchero's transmission is stuck in 1rst gear. It's a 3 speed manual transmission on the column. The column shifter isn't in the 1rst gear position, it's just kind of flopping around and won't engage into any of the gears, and it seems to be locked into 1rst gear. Any ideas on what it could be other than linkage which i already checked? | 
|  | |
12-26-2007, 11:44 AM
|
#2 (permalink)
| | Senior Member
Join Date: Mar 2007 Location: Ottawa, Canada
Posts: 1,154
|
Could be a worn or damaged selector fork in the transmission. Try accessing the transmission shift lever(s) at the transmission and levering it out of gear.
__________________
Art
2000 Taurus SEL Wagon 3.0 Vulcan (daily driver)
1993 Taurus GL Wagon 3.8 Essex
1991 Mercury Grand Marquis LS 5.0
1986 Chevrolet 3/4 ton pickup 4x4 350 with turbo400 and 208 transfer case
1978 Chevrolet 3/4 ton pickup 4x4 custom 6.2 na diesel with turbo400 and 203 transfer case
Planning 2008 Taurus X in a year
| |
| | |
12-26-2007, 11:51 AM
|
#3 (permalink)
| | Super Moderator
Join Date: Dec 2006 Location: Brookfield, Wisconsin
Posts: 1,595
|
Also have somebody move the shifter around to see what it does while you are looking at all the linkage. I am guessing something popped off or broke if it is not moving the linkage on the transmission.
__________________
Mark V
1998 Explorer 4.0 SOHC
1998 Windstar GL 3.8
2001 Corvette Coupe 6 Speed
2006 Honda Shadow Spirit 750 http://public.fotki.com/snextime/
Where is my Cape?
RockAuto Discount Code Discount Code: 194AD1718E27
Please enter this code in the ‘How Did You Hear about Us’ box to receive discount. Expires: 05/21/2008 If your exhaust tip is larger than your cylinder bore, then you are a Ricer.
You are as useful as a Screen Door on a Submarine! | |
| | |
12-27-2007, 09:23 PM
|
#4 (permalink)
| | Junior Member
Join Date: Dec 2007 Location: northern california
Posts: 5
|
Hey fellas, thanks for your input...i put it to use and got'r fixed! what i did was disconnect both of the shift rods from the transmission shifting arms and put my transmission into nuetral by hand, and put bricks behind all 4 wheels about a foot back so that when I found neutral, it wouldn't crush my ass! lol
I found neutral, sure enough, it rolled back and stopped on the bricks thank god. Kind of a redneck manuever, but i had no help and i've cheated death before, either that or death wasn't paying attention. Then, i reconnected the shift rods and cotter pinned 'em in place. I drove around the block and got to shift in all gears in and out fine, but it's sloppy and needs adjustment for sure to keep it from binding again like it did. It's raining and it's dark out, so i'll fine tune the shift rods tomorrow and get it dialed in (for another three months) lol. Thanks for your help guys, hopefully this post will help someone else in the future as this is a common problem with the Falcons/Rancheros due to the hokey shifting rod setup coming loose, bending, or breaking. | |
| | |
12-28-2007, 08:10 AM
|
#5 (permalink)
| | Super Moderator
Join Date: Dec 2006 Location: Brookfield, Wisconsin
Posts: 1,595
|
Glad to hear you got it fixed.
So you said it was all connected but it was binding only, nothing loose or broke?
__________________
Mark V
1998 Explorer 4.0 SOHC
1998 Windstar GL 3.8
2001 Corvette Coupe 6 Speed
2006 Honda Shadow Spirit 750 http://public.fotki.com/snextime/
Where is my Cape?
RockAuto Discount Code Discount Code: 194AD1718E27
Please enter this code in the ‘How Did You Hear about Us’ box to receive discount. Expires: 05/21/2008 If your exhaust tip is larger than your cylinder bore, then you are a Ricer.
You are as useful as a Screen Door on a Submarine! | |
| | |
12-28-2007, 08:58 AM
|
#6 (permalink)
| | Junior Member
Join Date: Dec 2007 Location: northern california
Posts: 5
|
Mark,yeah all was connected, but i think what caused the problem was one of the shifter rods came loose at the adjusting nut and slipped out of position, then the linkage got all bound up. I'm getting ready to go outside and dial it in this morning, and hopefully it'll be fixed for a while anyway. Thanks again guys-
john | |
| | |
| Thread Tools | | | | Display Modes |  Linear Mode |
Posting Rules
| You may not post new threads You may not post replies You may not post attachments You may not edit your posts
HTML code is Off | | |
| | » Stats |
Members: 22,259
Threads: 15,632
Posts: 48,591
Top Poster: jonmark1985 (1,630)
| | Welcome to our newest member, neginfluence04 | | » Partner Sites | |
Shopping for new cars can be a stressful experience especially if you don't have the right information. Our new car research center at CarEverything.com can help relieve this stress and bring the joy back to new car buying!
The Car Blog, or TCB for those who are acronymically inclined, is alive because some of today's top Web designers needed a place to drool and bitch about their motor vehicle obsessions.
Read the auto blog at Automotive.com to get the latest news and opinions, view the newest concept cars, and join discussions with auto experts from around the world.
Read the auto blog at Motor Trend Online for the latest auto industry news, expert opinions, vehicle photos, and more.
Join other Envoy Enthusiasts and chat about your GMC Envoy SLE, SLT, Denali and XUV. We are a growing community and would like to here from you.
| | » Advertisement | | | |
