Looking for wiring diagram 1998

[zigor61]

Hi,all.
Looking for wiring diagram for contour 1998.
Drove OK to the store and after won't start.
checked spark-OK, fuel pump fuse-OK, turn key to ignition position
no nose at fuel pump, unplugged pump connector-0 volt on each
terminal of fuel pump connector.
So how to check if fuel pump works or not and probably
I need wiring diagram (Where to get it online I don't want go to library)

[ElectrolysisDoc]

Locate the Inertia Fuel Pump Cut-off switch in the trunk ( I think ). Make sure it is electrically "closed". Push down to reset.

Try AutoZone.com for an on-line diagram.

[ferratilis]

Originally Posted by zigor61

Hi,all.
Looking for wiring diagram for contour 1998.
Drove OK to the store and after won't start.
checked spark-OK, fuel pump fuse-OK, turn key to ignition position
no nose at fuel pump, unplugged pump connector-0 volt on each
terminal of fuel pump connector.
So how to check if fuel pump works or not and probably
I need wiring diagram (Where to get it online I don't want go to library)

You are only going to get voltage at the fuel pump for a second or two, when you turn the ignition switch to the "run" position and the engine is not running.
You need to have somebody crank the engine, (ignition in the "start" position) and than measure the voltage at the fuel pump, but check the inertia switch first, like Edoc suggested.

[BroncoJoe19]

You probably have a fuel pump relay. Look in your power distribution box under the hood for it, or in your fuse panel.