i need help please!!!!

[Bighenry30]

ok so i have a problem. my uncle is in the army and he is goin to russia and he is leaving me his 1998 crown vic. so of course i was happy but i want to turn it into a beast. i want to get a new body kit and i wanted to get more horsepower. i have been lookin like crazy but i realized i know almost nothing about cars . so if any one can help me turn this car into a screaming power house please tell me.

[jonmark1985]

I'd try to either build or hunt down a terminator 4.6. Get a good set of 4 valve heads and a roots blower.

[misfitmod13]

i have 4 valve heads off a 02' Marauder, and an aluminium 4 valve block that needs a sleeve that i might be willing to part with, i agree with 85 mark 1 in that building a boosted engine is always ideal, but, your harness will run a n/a 4 valve with no problem, and it will be much less expensive, and you will still be able to achieve well over 300 horse, there are no additional sensors that will prevent a 4 valve from running on a 2 valve pcm and harness, but either the 2 wire to the com or crank sensor needs to be reverses for the pcm to read position properly, sorry but i can't remember which it is