cruise controle

[M@kke]

Hi to all econoliners,

Is it possible to mount a cruise controle on a 1998 E250 econoline (BEAST) with a original steeringwheel en elektic with other original pieces and parts.

[Pale Rider]

I would check to see if your model had cruise as an option, find the steering wheel, CCM (module) wiring schematic and trace the wiring to see if other components and connections are need. See if your model`s ECU/ECM can operate the CC. bc the vehicles computer/speed sensor is used to read cruise speed. Also check to see if your exsisting harness and fuse panel have locations in place for fuse and connectors...
I`d say it`s possible, but to what cost and effort???

[phantom_smack]

The wiring is usually there but you need a clock spring that supports cruise control and the cruise module and cable,steering wheel with the buttons.Most of the time the buttons can be installed on the existing wheel.

[M@kke]

Thanks , here in Belgium (europe) you dont find the parts so do you have some adress where i can find them there.

Do you have a manual on pdf or on the net from the econoline E250.