How Do I Pull Out The Bed On A 91 Van

SIMPSON · 08-31-2006, 06:28 PM

I Recently Purchased A 1991 Econoline Custome Van And Cannot Figure Out How To Recline The Bed In The Rear. Please Help.

julesagogo · 09-05-2006, 12:33 PM

Not sure which conversion you have so this may not work, but on my 90, it's pretty simple - go to the front of the seat and put your hands under the bench part of the seat and grab the iron bar in the front (next to your legs). Pull up and toward you. You may need to have a friend work the back side if the springs are still in good shape - they'll push down on the top of the back of the seat. The seat bench area will move toward you and the back area will lay down.

Good luck!

phrog · 10-09-2006, 01:47 PM

Is it a power bed (Look for switch on wall) some conversions use a lever on the left front frame of the seat