Ford Edge MIL :(

[smoke]

Hi all,

i got ford edge vehicle. suddenly, the engine starts to rough at idle & check engine lights up. when driving its very smooth & nothing wrong. just at idle the engine work roughly.

i tried to fix is in general workshop. they rebuilded the engine thinking that there is a problem with valves but after all the engine keep working roughly.

then, i brought it to my friend's workshop & we checked it with IDS. after clearing all faults & start the engine again.. there are some codes:

within the first 60 sec :
P0016 haft Position − Camshaft Position Correlation (Bank 1 )
P0018 Crankshaft Position − Camshaft Position Correlation (Bank 2 Sensor A)

after a while there is one more codes:
P0021 Intake Camshaft Position Timing - Over Advanced (Bank2)

this is freezing frame-Mode2 :
Free File Hosting Made Simple - MediaFire

( freeze1.jpg freeze2.jpg freeze3.jpg )

Please can anybody help me

pleasssseeeeeeeeeeeeeeeeeeeeeeeeeeeee it's millage 8000 Km

P.S. We checked timing chain, it's good

[smoke]

if you need to see data logger parameters, there are pics for that in the same link.

[t.hill17]

ditto on this question. My wifes 07 Edge is having the same codes. It also had p0300 and p0305 until I cleaned the battery posts and now it only has p0018 and p0021 and the rough idleing isn't as bad but still very there. any help guys? I also sprayed electrical contact cleaner on the MAF to no avail. Oil was just changed about 2 weeks ago along with new air filter

[Flyingjackal456]

These cars have a WARANTEE, both of you go to the Ford dealer. They will fix this for free, go and be happy....