Make sure to pull the hot/cold cable off the side of the heater core box. It is on the driver-side. You'll see the cable run to a circular part with a white plastic center. The white plastic is the retainer peice. I think you have to spread center to pull the cable out.
__________________
1998 Escort ZX2, T3 Super 60 at 8 psi, SCT Xcal2, Cobra MAF, 42#/hr injectors, MSD coil, Ford Racing wires, Ford Racing UDP, Fidanza flywheel, Spec 3 clutch, B&M shifter, Trubendz 2.5" exhaust, 19mm RSB, ES bushing kit, Eibach sportline springs, other goodies....
|