The valve is located on the side of the throttle body.
Removal & Installation
5.4L & 6.8L Engines
Disconnect the battery ground cable.
Disconnect the idle air control (IAC) valve electrical connector.
Disconnect the throttle bypass hose.
Remove the two bolts and the IAC valve.
To install:
Install the IAC valve and tighten the bolts in two stages:
Stage 1: Tighten to 89 inch. lbs. (10 Nm).
Stage 2: Tighten an additional 90 degrees.
Connect the throttle bypass hose.
Connect the IAC electrical connector.
Connect the battery ground cable.
__________________
1991 ford f150 ext/cab 5.0 m5od 4x4
1997 ford escort lx 2.0l
1988 lincoln continental 3.8l
Jeff
"If it ain't broke, you're not trying." -Red Green
|