2003 Ford F-250 VEHICLE SECURITY AND REMOTE START SYSTEM

04-28-2005, 08:36 PM

A friend of mine bought this factory Ford vehicle security and remote start system and there is no wiring directions with it. There are 3 web adresses on the box but you must be a dealer to use the site. Does anyone know where we can get the wiring diagram for this! Thanks in advance! Jake

Dallas_Dumbass · 01-09-2006, 02:08 AM

Just do a google search for the brand alarm & f350. you'll find it. I did the same on my compustar alarm and I helped the installer and found wiring instructions. I know he was given wrong information with wire the glow plug was for the truck not to crank until the glow plug light goes off.

phrozenintreestand · 04-04-2007, 09:26 PM

If you have a Diesel engine , make sure you have a diesel setting on the remote, I didnt have one and had to put a delay on the remote starter to delay 10 seconds until after the glow plug light went out, on my 99 F250 7.3, before I did the mod, it drained the batteries when it tried to remote start, I think most remote starters have the delay in them now.