inner/out tie rod change?

[Dieseljeep]

I have a 93 gl 2.3 I need to change my left inner tie rod end whil im in ther I might as well do the outer.How hard are these to do?

[theoldwizard]

Outers are easy. I never did inners but some of other Ford racks requires special tools to replace the inner/

You can get a rebuilt rack, which I am pretty certain includes inner tie rods for between $75 and $100. 2 inners could cost almost $50.

[Dieseljeep]

It all done on the left side ,it took about an hour total job.Very easy to do.Simple steps below .
1) jack up car on stands
2)remove wheel
3) undo inner and out bellows clamp
4) remove outer tie rod from knuckle,loosen jam nut ,count # of threads to remove outer
5)slide off bellows(boot)
6)use 1 3/16 crowfoot or inner tie rod socket
install is reverse of this and dont forget the new cotter in on the outer tie rod
7) take car to alignment shop.