Automatic Transmission gasket replacement HELP for a 1986 V8 Thunderbird Following the instructions from my Haynes Repair Manuel, I am attempting to remove the automatic transmission pan in order to replace the very old gasket that was leaking.
I raised the front of the car on jackstands and I Removed all the bolts and drained part of the transmission fluid, but I can not remove the pan. It's tight between the muffler (pg. 1-25, Illustration 28.7 on Haynes Manual) and the crossmember (pg. 7B5, illustration 9.2 on Haynes Manual) that hold the transmission.
The Haynes manual does not say anything else needs to be removed in order to get the pan out. Please, if anyone could help me out, I would appreciate it. I have gently tried for a an hour to remove the pan and its way too tight. I can't slide it out from any angle.
Thank you in advance. |