2000 Winstar heating problems

[orp100]

Hi, I have a 2000 Winstar Sel, The heater and A/C has been working just fine untill today, now the A/C works fine the fan runs as it should but when turn off the A/C and slide the control to heat all I get is outside air and no heat.
Does anyone have any ideas??

Thanks

[kish-81]

Do you hear a clicking sound from behind the console? This happened to our van - there is a motor & gearbox that drive the blend door. (controls outside air & heated air mix) The gear will strip & then all you get is cold air. (and the clicking noise as the motor tries to move the door)

Dave

[vindctar]

From your description, it seems you most likely have a clogged/leaky front heater core. Do you get heat in the rear?

Originally Posted by orp100

Hi, I have a 2000 Winstar Sel, The heater and A/C has been working just fine untill today, now the A/C works fine the fan runs as it should but when turn off the A/C and slide the control to heat all I get is outside air and no heat.
Does anyone have any ideas??

Thanks

[ssmith]

Originally Posted by kish-81

Do you hear a clicking sound from behind the console? This happened to our van - there is a motor & gearbox that drive the blend door. (controls outside air & heated air mix) The gear will strip & then all you get is cold air. (and the clicking noise as the motor tries to move the door)

Dave

This is exactly what is happening to us. What parts in this set up need to be replaced?

ssmith

[msbell]

The ac door actuator is the part that strips out.