98 windstar will not start my 98 windstar will not start.the fuel pump was replaced a moth agoand it worked fine.IT started cutting off when i would drive it. I just waited 15 to 20 min and it would start up and drive ok. Ihave replaced the fuel filter,wires , plugs, ignition module, cam and crank sensor and it wil crank but will not start. the fuel pressure is about 45 but there is no spark.The pcm has voltage going in 12v. there is only 1.3 v to crank sensor. does anyone know what the logic voltage should be etc. help help help |